General

Function Gesture: You can set and customize a function gesture that will be triggered when you press and hold two fingers on the screen for 1 second. Functions that can be triggered are Camera (taking or selecting a picture from your library to create a Photo at the current location), Screen Capture (taking a screenshot used to create a Photo at the current location), Event (that will display the Event window to record a Mark at the current location), or MOB Alarm (to trigger the Man Overboard alarm).

Boat Length: Set your vessel length. This information is used to display the boat icon in real scale when zoomed in far enough on the chart.

Boat Width: Set your vessel width. This information is used to display the boat icon in real scale when zoomed in far enough on the chart and by the Route Assist algorithm (to make sure your boat fits in narrow channels).

Boat Height: Set your vessel height. This information is used by the Route Assist algorithm to make sure the clearance under bridges is respected when building an assisted route.

Size of Static Icon: Adjusts the size of the boat icon. Note that if you zoom to a very small range, the vessel icon size will be displayed at its real scale (size) on the chart according to the "Boat Length" parameter.

Prevent Auto-Lock: When enabled, this setting prevents your device from going into sleep mode while TZ iBoat is open. It is useful when your device is mounted on your dash and when you want to have TZ iBoat always turned ON.

Trip Bar

Data 1: Set the first data displayed at the bottom of the screen when the Navigation mode is selected (when recording a Trip).

Data 2: Set the second data displayed at the bottom of the screen when the Navigation mode is selected (when recording a Trip).

Data 3: Set the third data displayed at the bottom of the screen when the Navigation mode is selected (when recording a Trip).