Target

This button allows to show/hides targets on screen as well as adjusting parameter related to targets:

  • Display Target Label: Shows or hides the target labels (ID or Speed) on the screen. You can select if you want to display the target ID or the target Speed (or both) from the Targets Options. When set to ID (default) and for AIS targets, the label displayed on the screen is the name of the ship or the MMSI in case the name is not available.

  • Display Trail on All Target: Displays a trail on all targets.

  • Display Trail on Dangerous Target: Only display a trail on targets that are categorized as dangerous (targets that break the CPA/TCPA Values).

  • ARPA Targets: Displays the ARPA target from the radar. Please refer to ARPA Target for more information.  Heading information is required.

  • Cancel all ARPA targets: Erases all the ARPA targets that are currently tracked by the radar.

  • Display All AIS: Displays all AIS targets.

  • Display Dangerous AIS: Only display the AIS targets that are categorized as dangerous (targets that break the CPA/TCPA Values).

  • Apply AIS List Filter on Chart: Causes the AIS list filter to also be applied on the chart when enabled.

  • TZ Online AIS: Displays AIS targets received through the Internet. This does not require TimeZero to be connected to a live AIS receiver. However, AIS targets received from the Internet can be subject to high latency and is not intended for navigation. Please refer to AIS Online for more information.

  • Track All AIS Target: Enables the Track recording on all AIS targets. This feature should be used with caution as it can create lots of tracks.

  • DSC: Displays DSC targets. Please refer to DSC Targets for more information. This option only appears when DSC has been configured as an input in the Connection Wizard.

  • DSC Tracks: Displays DSC target tracks. This option only appears when DSC has been configured as an input in the Connection Wizard.

  • Clear all DSC: Erase all the DSC targets and their tracks. This option only appears when DSC has been configured as an input in the Connection Wizard.

  • Fleet Targets: Displays Fleet targets. This option only appears when Fleet Tracking has been configured. Please refer to Fleet Tracking for more information.

  • Apply List Filter on Chart: Causes the Fleet Target list filter (that can be accessed at the top right of the list to also be applied on the chart. 

  • Reset all Fleet Targets: Reset all the fleet targets. This will cause all fleet targets to disappear from the screen until a new position is received.

  • Send AIS Text Message...: Open a window that allows to send a Text Message to a specific class A AIS target. Note that the "ABM" sentence must be selected as an output (on the port where the AIS transmitter is connected) for this option to appear.